Medium Duty
Tension Tester
The Hydrajaws® 2000 Series Tester
|
Hydrajaws Medium Duty Tester
Hydrajaws Medium Duty Tester, which is the industry standard for all site fixing tests. The 200 series has been designed offering: • Standard pulling stroke: 50mm • Optional pulling stroke: 100mm • Facility to rotate pulling jaw through 360° in relation to grip handle for improved access in confined spaces • Automatic return for pulling jaw The increase stroke of the 2000 series tester gives the following benefits: • Complete extraction of most fixings after failure in one simple operation • When fixings are tested to failure they usually need to be fully extracted from the base material. The 50mm stroke of the 2000 series means this can be done without any re-adjustment of the bridge legs. |
The 100mm (optional) stroke version is ideal for frame anchors. • Faster set up time on multiple testing projects • Initial adjustment of the tester height relative to the fixing can now be achieved with the loading handle rather than the bridge legs • Unrivalled versatility • A wide range of well proven accessories enables virtually any type of fixing to be tested. Five different bridges are available to direct reaction loads into the base material and away from the fixing. Over fifteen general purpose and special adaptors can be used to link with the fixing. See separate accessory sheet. • Special adaptors can be made for new applications. |
Quick Links to Products:
medium duty tension tester | heavy duty range | scaffold tester
eyebolt & ringbolt tester | safety lifeline tester | material bond tester
wall tie tester | long stroke tester | tension meter
