Todays Date is:

The Hydrajaws Safety Harness Eyebolt Testing Kit Mk II

Safety Eyebolt
& Ringbolt Testers

"Choose Hydrajaw's Safety Eyebolt & Ringbolt Tester Kits for
safety related applications"

For testing Safety Harness Eyebolts to the requirements of BS 5845 and EN 795 "Protection against falling from a height, anchor devices - requirement for testing." and BS 7883:2005 BS 788:2005 Code of Practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN795.

Ladder restraint hooks and most ringbolts in concrete or masonry may be tested with this kit.

Kit includes tester with 15kN fixed gauge, M12 Locking adaptor, M12 Locking adaptor Clevis, 150mm Load Spreading Bridge, 75mm hex extension legs, M12 Threaded Stud Coupler and 22mm AF-Operating Nut.

Each structural anchorage, after installation, should be submitted to an axial pull-out force of 6kN to confirm the soundness of the fixing.

Also in this section

Please click on a link below to view further product details and related information for Safety Eyebolt & Ringbolt Testers...

•  Accessories
   Safety Eyebolt & Ringbolt Testing    Accessories for Medium Duty Tension    Testers

•  Test Procedure
   Test procedure for Safety Harness    Eyebolt

Test Rig Arrangements

Tension testing Safety Harness Eyebolts to EN 795 and BS 7883 using Hydrajaws Tension Tester and 150 load spreading bridge.

	Eye Type Anchors Click image to enlarge
	Ladder restraint hooks Click image to enlarge
	Reaction loads are directed away from the brick under test Click image to enlarge

When viewing an image hover top right or top left to scroll through image shots.

For further information about our products and services, please click here to contact us.

1 The Courtyard, Roman Way,
Coleshill, Birmingham. B46 1HQ

Tel: +44 (0)1675 430 370
Fax: +44 (0)1675 465 950

privacy | terms | contact | xhtml

Safety Eyebolt& Ringbolt Testers

Safety Eyebolt
& Ringbolt Testers