Heavy Duty Range Accessories
"Specifications & Test Procedure Compliance"
Heavy Duty Load Spreading Bridge
Manufactured from hollow square section tubing for hight strength with low weight. The dimension from fixing centreline to closest support is 242mm. Three adjustable legs with swivel feet allow the unit to be aligned with the fixing centreline or accurately levelled with the aid of a spirit level mounted on the bridge.
The bridge allows testing of fixings whose centreline is as close as 90mm to an edge or 70mm to a post; this means that in some cases tests for safety fences may be carried out without disturbing the post or rails. The leg length allows a height adjustment of 275mm and gives full clearance for the pulling frame described below. Supplied with the attachment plate and screws to fix to tester. Weight = 18Kg. Maximum capacity = 125kN.
Pulling Frame
Allows the fixing to be fully torqued to demonstrate first movement and clamping force. Internal clearance for dial gauge to locate directly onto bolt head. Accepts anchors with diameters of 28 - 33mm directly and smaller diameters using plain adaptors of 13 17 21 and 26mm diameters supplied as standard. (Other sizes on request). Weight 5Kg. Maximum capacity = 125kN.
Dial Gauge & Stand
Dial gauge has divisions of .02mm on a 0-25mm scale which may be zero'ed before starting tests. Hydrajaws designed stand has heavy weight base to couterbalance gauge on remote arm which allows the base to stand 300mm from fixing centreline. Thre adjustable legs give precision alignment of gauge with fixing and allow use on uneven surfaces. Weight 3.5Kg.
Quick Links to Products:
medium duty tension tester | heavy duty range | scaffold tester
eyebolt & ringbolt tester | safety lifeline tester | material bond tester
wall tie tester | long stroke tester | tension meter
