Call +44 (0)1675 430 370 - Mon to Thur - 8.30am to 4.30pm, Fri - 8.30am to 2.30pm


Bolt Test Adaptor
For M16 nuts, the bolt tester adaptor directly enages the nut in the pulling jaw.


Slotted Button Adaptor
For testing fixings where a connection is made underneath the head of the fixing or anchor the slotted button adaptor is used.
Available in 4.5, 5.5, 6.5, 8.5, 10.5 & 12.5mm.

Threaded Button Adaptor
For testing threaded fixings the threaded button adaptor is used.
Available in M4, M5, M6, M8, M10 & M12.

Threaded Stud Adaptor
Suitable for testing sleeve and stud anchors. The model 2050 Tester has an extended version of the Model 2000 Adaptors.
Available in M10, M12, M16 or M20.
The 2050 also available in M24 and M30.

Hydrajaws Threaded RodThreaded Rod Adaptor
The threaded rod adaptor is primarily used for testing remedial wall ties.

The Clevis Adaptor
For testing ringbolts the Clevis adaptor is used.
See our clevis range guide for sizes and max loads.

Insulation Adaptor
Suitable for testing ETIC fixings.
See our Data sheet.

 The Box Adaptor
 A specialist test adaptor for heavy duty testing.

For a general guide to using Hydrajaws adaptors see our Adaptor Operating Guide.

Or see our YouTube video here.