Call +44 (0)1675 430 370 - Mon to Thur - 8.30am to 4.30pm, Fri - 8.30am to 2.30pm

M2000 Medium Duty Tension Testers

Hydrajaws M2000 range

The Model 2000 Tester has had an upgrade. It is still the same robust and portable model but with telescopic legs, new graphics and a new enhanced bridge design.

Hydrajaws M2000 Medium Duty Fixing Testers enable engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of up to 25kN is applied to the fixing mechanically and hydraulics are used to register the load through an accurate analogue gauge, making the tester very reliable.

Load spreading bridges keep reaction loads away from the fixing. Fixings up to M16 may be located directly in the tester, while a variety of adaptors enable a wide range of other types and sizes to be tested.

  M2000 RANGE FEATURES
  • Up to 50mm of Stroke
  • New Load Spreading Bridge with Telescopic Legs and swivel feet
  • Turning Handle with 22mm integrated nut (for use in confined spaces)
  • M12 Locking Adaptor
  • M12 Ringbolt Adaptor Clevis
  • Robust carry case with grab handle
  • Calibration certificate (valid for 12 months)

 

  DOWNLOAD PDF GUIDES

M2000 Tester Manual

 

 

M2000 PRO Tester

M2000 PRO Tester

For testing anchors and fixings between sizes M4 and M12, the M2000 ‘PRO’ is our general purpose tester kit.

View details

M2000 Scaffold Tester

M2000 Scaffold Tester

The Model 2000 Scaffold Tie tester kit with 20kN gauge is our dedicated tester for the Scaffold Industry. It allows Scaffolders to test all industry specific Scaffold fixings including ringbolts and drop in anchors.

View details

M2000 Safety Harness Eye Bolt Tester

M2000 Safety Harness Eye Bolt Tester

The M2000 Eye bolt tester kit with 25kN gauge is our dedicated kit for testing Safety Harness Eyebolts as used for abseiling and others working at height. However the tester is capable of testing any eyebolt and ringbolt across multiple applications.

View details

M2000 Material Bond Tester

M2000 Material Bond Tester

Using 50mm and 75mm bond discs, the M2000 Material Bond Tester accurately determines the the bond strength of a wide and varied range of materials including concrete, screeds, repair mortars, epoxy resin coatings, laminates, plastics, paints and enamels.

View details
  M2000 TESTER KITS

M2000 PRO Tester kit

For testing anchors and fixings between sizes M4 and M12, the M2000 ‘PRO’ is our general purpose tester kit.

 

M2000 Scaffold Anchor Tie Tester

The M2000 Scaffold Tie tester kit with 25kN gauge is our dedicated tester for the Scaffold Industry. It allows Scaffolders to test all industry specific Scaffold fixings including ringbolts and drop in anchors.

 

M2000 Safety Harness Eyebolt Tester

The M2000 Eyebolt tester kit with 25kN gauge is our dedicated kit for testing Safety Harness Eyebolts as used for abseiling and others working at height. However the tester is capable of testing any eyebolt and ringbolt across multiple applications.

 

M2000 Material Bond Tester

Using 50mm and 75mm bond discs, the M2000 Material Bond Tester accurately determines the the bond strength of a wide and varied range of materials including concrete, screeds, repair mortars, epoxy resin coatings, laminates, plastics, paints and enamels.