Safety Lifeline Cable Tester KIT 1 – Frame Only
SKU: 030-006£1,549.00
The upgraded Hydrajaws Safety Lifeline Cable Tester Kit 1 is the lifeline tester frame only option, for operators who already own an M2000 or M35+ tester. It enables engineers to validate the installation of swaged components on new or existing engineered lifeline systems to BS 7883, up to a maximum tensile load of 20kN.
Manufactured to exact high standards, the Hydrajaws Safety Lifeline Cable Tester clamps directly to the 8mm wire rope. It comes with all the accessories, excluding the tester, to test existing installations including those with long-terminating assemblies without any additional parts needed. The lifeline tester frame only kit also includes an 80Nm Verify Torque digital torque wrench adaptor.
Features
- Cable test frame with extension bars
- Single hinge cable arrangement with swing bolt design
- Supplied in a robust protective carry case with pockets for an M35+ tester and accessories.
- Full operating instructions included.
The kit includes the following accessories:
- Hydrajaws 80Nm Verify Torque
- Operating nut and drop rod for M35+
- Pulling pin for M2000
- 24mm ratchet spanner
- Ratchet wrench with 17mm socket
- 14mm spanner
- Ball driver
- 8mm barrel clamp
- 12mm slotted adaptor
- Extension collar insert 12mm
- Extra extension rods
- Knurled adaptor 8mm (10mm & 12mm optional)
- 6mm hex key
- Tool lanyards
Ähnliche Produkte
-
M2008 Heavy Duty Tester Kit
£3,203.33 View productOur portable self-contained 145kN tester has been designed to perform proof load testing of larger construction fixings. The lightweight aluminium load-spreading bridge with the tester weighs just 30kg.
-
M0095 Long Stroke Tester Kit
£789.71 View productUsed to determine the strength and suitability of fixings in built-up roofing constructions where performance data is unavailable. The long stroke of 80mm means that once tested the fixing can be extracted.
-
M2000 Safety Harness Eye Bolt Tester Kit
Preisspanne: £1,550.43 bis £1,918.89 View productDedicated kit for fall protection anchor load testing Safety Harness Eyebolts as described in BS 7883:2019 inc anchor devices conforming to BS EN 795.
-
M0097 Tension Meter Tester Kit
£870.26 View productAn in line tension load cell designed for testing wire ropes for fall arrest, rigging, guy ropes, tower, and mast supports, and checking the security of crimped/swages end fittings as applied to wire ropes.
