Kits d'extractomètre
-
M2000 PRO Tester Kit
£1,468.00 – £1,791.00 View productThe M2000 PRO Tester Kit anchor tester comes complete with all the necessary accessories to perform a pull test on a wide range of fixings up to a maximum tensile load of 25kN.
-
M2000 Scaffold Tie Tester Kit
£1,325.00 – £1,665.00 View productOur popular dedicated M2000 Scaffold Tie Tester Kit is manufactured specifically for the scaffolding industry. It allows Scaffolders to load test industry-specific scaffold anchor ties to NASC guidance TG4:19 up to a maximum tensile load of 25kN.
-
M2000 Safety Harness Eye Bolt Tester Kit
£1,427.00 – £1,766.00 View productDedicated kit for fall protection anchor load testing Safety Harness Eyebolts as described in BS 7883:2019 inc anchor devices conforming to BS EN 795.
-
M2000 Material Bond Tester Kit
£1,506.00 – £1,845.00 View productTest the bonding strength of a wide variety of materials including concrete, screeds, repair mortars, epoxy resin coatings, laminates, plastics, paints and enamels using the M2000 Material Bond Tester Kit.
-
M2000 Safety Lifeline Cable Tester Kit 2
£3,040.00 – £3,379.00 View productLightweight, compact, and very user-friendly, the tester frame clamps directly to an 8mm wire rope and is used to comply with BS 7883:2019 (other clamp sizes are available to purchase separately)
-
M2000 Safety Lifeline Cable Tester Kit 1 – Frame Only
£1,466.00 View productPerfect for operators who already own a M2000 Pull tester, the Lifeline Swage tester Frame Only is supplied operating tools in a carry case with pockets for the M2000 tester.
-
M2050 PRO Medium Heavy Tester Kit
£2,085.00 – £2,434.00 View productCovering the pull testing range of 0-50kN, the M2050 is used to validate the correct installation or establish the safe working load of a vast range of anchors & fixings in line with BS 8539.
-
M2008 Heavy Duty Tester Kit
£2,920.00 View productOur portable self-contained 145kN tester has been designed to perform proof load testing of larger construction fixings. The lightweight aluminium load spreading bridge with the tester weighs just 14kg.
-
M0095 Long Stroke Tester Kit
£727.00 View productUsed to determine the strength and suitability of fixings in built-up roofing constructions where performance data is unavailable. The long stroke of 80mm means that once tested the fixing can be extracted.
-
M0097 Tension Meter Tester Kit
£782.00 View productDesigned for testing wire ropes used for fall arrest systems, strain measurement of rigging, guy ropes, tower and mast supports, and checking the security of crimped/swages end fittings as applied to wire ropes.
-
Wall Tie Tester Kit MK2
£1,226.00 – £1,566.00 View productUsed for testing all types of remedial wall tie to meet the requirements of BRE Digest 401 to investigate the suitability of the base material for a particular tie or during installation to verify the quality of the installation.
-
Hydraulic Hollow Cylinder Tester Kits
£3,107.00 – £3,941.00 View productSpecialist hydraulic equipment for load testing a wide variety of applications 0-500kN. From threaded telecom mast fixings to rebar and stud fixings.
-
M35+ Dual Load Capacity Digital Pull Tester
£1,875.00 – £2,295.00 View productThe M35+ is the world's first lightweight modular digital pull tester with Easi-Effort® Technology increasing testing frequency & reducing operator effort.
-
Safety Post and Foundation Test Equipment
£4,154.00 View productSpecialist equipment for testing Vehicle Restraint Systems (VRS) safety barrier posts in accordance with BS 7669-3:1994